|Starting with version 2.2 all Massoth loco decoders are equipped with a SUSI interface. SUSI is also integrated in all sound decoders and pulsed smoke generators.|
The familiar melody module with new technology.
|eMOTION XLS Onboard
Sounddecoder based on LGB Onboard.
|eMOTION XLS Sound Decoder
Powerful 3 Amp Sound Decoder with up to 6 sound channels and 13 function outputs. Usable for locomotives with up to two motors.
|eMOTION LS Sound Decoder
Small 1,5 Amp Sound Decoder with up to 6 sound channels and 6 function outputs. Usable for locomotives with 1 motor.
|eMOTION S Sounddecoder
Small stand-alone sound module with SUSI interface and 3 Watt output. Programmable to all Massoth sounds available (check XLS sound list).
|eMOTION XXL II Driving Decoder
Powerful 8 Amps driving decoder with new function mapping. Maximum driving current 10Amps
|eMOTION XL II PluG Loco Decoder
New XL II Loco Decoder incl. PluG interface. Includes a new load control, new mapping function and separate programming address.
|eMOTION XL-M1 Driving Decoder
XL Driving Decoder with direct interface for LGB/Märklin Gauge 1
|eMOTION XL Driving Decoder
Powerful 3 Amp driving decoder with 4 Amp maximum load capacity and 8 function outputs. Usable for locomotives with up to two motors.
|eMOTION L Locomotive Decoder
Universal 1,8Amps loco decoder (1 motor) with 8 function outputs for light control and other functions including a RC servo.
|eMOTION M Locomotive Decoder
Small 1,2Amps Locomotive Decoder (1 Motor) with 6 function outputs for switching light and other load also integrated RC servo control for small locos.
New 8FS Servo Decoder with integrated 6V voltage regulation.
Operation with up to 8 servos and a separate programming address.
|eMOTION 8FL Function Decoder
Smallsized 8-channel function decoder to control light and other loads. Two RC servo controls are implemented.
|eMOTION Multi-Purpose Relay-Board (8 Amps)
|eMOTION 6 Volt Fixed Voltage Regulator
Smoothed 6 Volts controller for the operation of RC servos, smoke generators and lighting units.
|eMOTION Fire Box Light Module
Small fire box light module.
|eMOTION Pulse Generator
Pulse Generator Set for Sounddecoder.
|eMOTION Powercap maxi
The new Powercap maxi replaces the former
eMOTION Goldcap Buffer 8151501.
The Powercap maxi supplies power to the digital decoder in case of track power interruptions. The maximum buffer time with 2 motors is up to 30 seconds.
The size has been reduced by approximately 40%.
|eMOTION Powercap micro
The Powercap micro supplies power to the digital decoder in case of track power interruptions. The maximum buffer time with one motor is up to 30 seconds. This ensures safe operation of small locomotives in cases of bad contact and power interruptions at switch frogs and contaminated track sections.
Here you can find several loudspeakers for connection on our XLS and LS decoder.